product features:

·Simple installation and easy to use ·Handle objects on one or both sides ·Easily adjust processing width ·Watt density control ·Parallel sliding device ·Process control ·Low processing cost and good effect ·Safe and clean

Due to the low surface energy of the PP material, the surface cannot adhere well to liquid glue and ink. After treatment by the Tantec corona system, the surface energy can be significantly increased and the adhesion characteristics improved.

Processing the entire board can reduce the reject rate and optimize the processing effect. For this reason, during the process, the corona discharge must cover the edge of the board. Tantec can achieve this by increasing the thickness of the insulating layer and extending the rolling time of the roller.

Increasing the insulation thickness allows the discharge ions to evenly affect the surface of the object to better handle thicker plates (thickness up to 50mm).
FoamTEC can handle one or both sides of an object. The adjustable electrode has great flexibility and can know the specific height of the electrode.

The most important factor in dealing with corrugated boards is to prevent the loss of power and ozone residue caused by processing into the material holes. FoamTEC's unique thick anode design method effectively prevents excessive treatment in the material holes.

Features：
·Simple installation and easy use All you need is compressed air and connections to various electronics.
·Objects can be processed on one or both sides.
·Easily adjust the processing width When the processing width is different, you can adjust the electrode wire without changing other parameters.
·Watt density control This device can adjust the output power of HV-X series generator according to the line speed.
·Parallel slides Parallel slides with air cylinders clean and maintain the area to be treated.
·Process control This equipment is equipped with HV-X series discharge generator and PLC device, which can monitor and adjust the complete processing process.
·Low processing cost and good effect. It can effectively process foamed plastics and boards with only electrical energy. Different width and speed settings require different power, which is generally in the range of 1-4KW.
·Safe cleaning The device is equipped with a safety switch and a safety interlock device to ensure safe use. The ozone filter device can eliminate ozone generated during processing.